Criteria for choosing the right bed bug exterminating company in Columbus

When bed time comes, all you want is to have a good night sleep so your body can recuperate and prepare for another day ahead. After a long day at work, a nice and comfortable bed would surely feel so good. But what if you have tiny creatures in your bed that would bite you, suck your blood while you are trying to get some sleep, and leave you with red bumps all over your body? With this, you need to find the best Bed Bug Exterminator Columbus so you can be sure that the bed bugs will be eliminated completely.

Bed bug exterminator in Columbus

gfsagasgasgasIn Columbus, Ohio, many bed bug exterminating companies are offering their services. However, not all of them are competent enough to eradicate the bed bugs in your home. Therefore, before you avail of the services of a certain group, you have to ensure that they can do the task properly. You have to make a list of the candidates and screen them out based on a set of criteria.

Here are some criteria that you have to consider when choosing the right bed bugs exterminator in Columbus.

Experience and knowledge

Bed bugs may come and go especially when the exterminating company that you hire is unable to completely get rid of them. For this reason, you have to take a look at the experience and knowledge of the specialists that you will hire. You have to know the number of years that they have been rendering pest control services. With a well-experienced and knowledgeable team of bed bugs exterminator, you can be sure of the quality of service that you will get since they already know the twists and turns of bed bugs control and management.

Pest management approach

A good bed bugs exterminating company should be able to educate you about how they are going to eliminate the bed bugs in your home. They should explain to you the pest management approach that they are using. This way, you will have a better idea of how the process would be.


gfsagfasgasghasHaving bed bugs in your bed, clothing, and other parts of your house could be very annoying. Therefore, you have to hire a group of bed bugs exterminators that can come as soon as possible without any excuse. Additionally, they should be able to do exactly what they say in terms of getting rid of the bed bugs. They should be transparent about the process and not lead you on to something that they can’t really do.…

Get Rid of Carpenter Bees Using DIY carpenter bee traps

Carpenter bees are not only a nuisance but also very destructive. Normally, they bore holes in unpainted lumber including decks, handrails, and fascia boards. In fact, every year when the springtime temperature rolls in you know they are coming. If you are not careful, you might be forced to run from these pesky little insects. However, they should not scare you since the theory of making their baits is very simple.

How you can trap carpenter beeskmb53erd5t26y3e7u28

Trapping carpenter bees can be dangerous and tricky since these insects are not cooperative. This is why the best defense is attacking. To trap them, you will have to buy a trap or build one yourself. Normally, these bees drill holes and tunnels in wood. Therefore, you can use this to your advantage. The easiest way to trap them is to build holes in a piece of wood with tunnels leading to an empty jar. But how can you make Carpenter Bee Traps – DIY carpenter bee traps & Bee Butter Bait? Here are a few DIY steps

Collect the supplies

Look for some scrap lumber wood around building sites or look for one 8 foot wood that will be enough to build several of these simple traps. After obtaining the wood get your tools out set up a work table for cutting and assembling the wood.

Cut the wood

Using a handsaw or a woodcutter, cut the following lengths two 7 inches length, fours pieces of 8 inches length for the sides and one 6 inches length at the bottom. Next, assemble the 8 inches length sides using screws or nails to attach them along edges. For the roof panel, lay the 7 inches length pieces on top of the box that you have made by the 8 inches, center it and join it to the body using screws or nails.

Make holes

Using 0.50 inches drill holes in 3 sides. These holes should be at least 45 degrees angled upwards to prevent sunlight and about 1.50 inches below from the roof. Also, make another hole on top of the bottle cap but be careful to avoid damaging the threads. Before making another hole in the box, measure the diameter of the bottle cap so as to fix it into this hole without glue. It should be the same measurements as the outer diameter of the bottle cap. Next, carefully attach the bottle cap.

Attach the bottom panel

After fixing thehnv43er52t6et62 bottle cap, attach the bottom panel using nails or screws and add a hook with a chain or rope to tie with something for hanging the trap. Once your trap is ready for use, hang it securely in a carpenter bees populated area. Once the trap is full remove the bottle, throw it away, and attach another one. Also, ensure that you are careful while doing this and hang the trap in a place where the bees can see it well.

  • If you want to make this move more effective it’s advisable to add an attractant or bait.
  • Although the measurements do not have to be followed accurately, the holes should be inches or 1.27 cm.
  • Instead of using a finished grade lumber wood, you can use scrap wood.